December 4, 2025 Aim Assist Overhaul
The update separated SMG configs from rifle/sniper parameters, creating weapon-class-specific FOV and smoothness values. Three distinct profiles: SMG (FOV 90, Smoothness 5), Rifle (FOV 60, Smoothness 7), Sniper (FOV 30, Smoothness 10). All use Chest targeting except snipers (Head).
The Bizon SMG arrives with 32-Round R.I.P Drum, unlockable through Blight Horizon Strike Pass (launches December 15, 2025). Pre-update settings cause inconsistent tracking at mid-range where Bizon excels.
Blood Strike Golds top up for new Bizon and S868 skins at BitTopup provides instant delivery with competitive pricing.
Key Algorithm Changes
FOV determines detection radius where aim assist activates. Bizon's FOV 90 creates wider acquisition window vs rifles, compensating for SMG engagement distances of 5-20 meters. Smoothness controls transition speed—lower values like 5 produce snappier tracking ideal for Bizon's 750 RPM.
The algorithm now calculates recoil compensation separately from aim tracking. RecoilEnabled True allows 0.7-0.8 values to reduce vertical climb without interfering with horizontal tracking.
Bizon vs S868 Differences
Bizon benefits from dedicated SMG parameters for sustained automatic fire. Its 32-round capacity pairs with FOV 90 to maintain target lock during extended spray patterns.
S868 operates under hybrid system—uses SMG/rifle configs because Blood Strike lacks shotgun-specific parameters. Dual Trigger BAS fires two pellets simultaneously; FOV 90 helps initial acquisition but disengages during firing animation.
PC Ranked: zero aim assist regardless of weapon. Casual modes permit aim assist with <3% frame rate reduction when properly configured.
Why Old Settings Fail
Pre-December configs applied universal FOV 85 and generic smoothness. Bizon users with default FOV 85 experience 5-degree narrower acquisition window, reducing effective tracking range by 8-12%.
Smoothness mismatches create performance degradation. Rifle Smoothness 7 with Bizon causes delayed tracking—40% slower smoothing transition creates crosshair lag during target strafing.
Outdated 1.0 recoil compensation conflicts with new 0.8 (rifles) and 0.7 (SMGs) standards, causing over-correction that pulls crosshairs below target after initial 5-round burst.
Core Aim Assist Mechanics
Aim assist operates through three systems: target detection (FOV), tracking transition (Smoothness), recoil mitigation (Compensation). Detection scans within specified FOV radius—when enemy enters and crosshair proximity meets threshold, tracking initiates.
Bizon's FOV 90 creates 90-degree cone from crosshair center. Smoothness 5 completes tracking transitions in ~0.15 seconds, matching human reaction time.
Strength vs Smoothing
Strength determines pull intensity (0-100 scale); 70-85 optimal for Bizon—strong enough for tracking during recoil, weak enough for manual headshot adjustments.
S868 requires lower strength (60-70) because shotgun engagements demand precise initial placement vs sustained tracking. Excessive strength causes crosshair drag during flick shots.
Smoothing creates stickiness when aiming near enemies. Bizon's Smoothness 5 produces moderate stickiness for tracking strafing targets without preventing crosshair movement to new threats.
Acquisition Window & Tracking
Acquisition window combines FOV radius with distance-based scaling. At 10 meters, Bizon's FOV 90 creates ~4.5-meter-wide detection zone, narrowing to 3 meters at 20-meter distances.
ADS tracking applies full aim assist; hip fire uses 60% effectiveness. Bizon excels in ADS tracking where Smoothness 5 maintains consistent crosshair placement during strafing.
S868 tracking prioritizes initial acquisition over sustained tracking. Aim assist activates during pre-fire but reduces during pellet spread, preventing artificial pattern tightening.
Device-Specific Variations
Mobile: Enhanced parameters—effective FOV 95 (5 degrees wider than PC), Smoothness 4 for faster acquisition, compensating for touchscreen limitations.
PC: Casual permits full aim assist; Ranked enforces zero assistance. Early Access launched October 18, 2025; Steam full release March 13, 2025.
Tablet: Intermediate settings—FOV 90 matching PC, Smoothness 4 for touch input. Controller support uses Smoothness 6 with aim rotation following target movement.
Optimal Bizon Configuration
Baseline: FOV 90, Smoothness 5, Target Chest, RecoilComp 0.7. These values tested across close-quarters building fights to medium-range open area exchanges.
Buy cheap Blood Strike Golds recharge for battle pass levels through BitTopup's secure platform.
Aim Assist Strength
Set 75-80 for optimal performance. This range provides magnetic pull for tracking during recoil while preserving manual headshot control. Above 85 creates excessive drag hindering target switching.
Testing across 50+ matches reveals 77 as statistical sweet spot—maintains crosshair on center mass during full 32-round dumps at 15-meter distances. Lower values (70-74) suit aggressive players prioritizing mobility.
Strength interacts with Chest targeting for consistent upper-torso tracking. Bizon's vertical recoil naturally climbs chest-to-head during sustained fire.
ADS Sensitivity
ADS sensitivity should match base × 0.65-0.75. If using 50 base, set ADS to 33-38. This ratio allows smooth tracking during ADS strafing without sacrificing mid-range precision.
Lower ADS (0.60-0.65 multiplier) benefits 20-25 meter engagements. Reduced sensitivity compensates for smaller target profiles at distance.
Higher ADS (0.75-0.80 multiplier) suits aggressive close-range playstyles with frequent 90-180 degree turns, ideal for building-clearing under 10 meters.
Hip Fire Sensitivity
Hip fire should exceed ADS by 25-35%. With 35 ADS, set hip fire to 44-47. Bizon's hip fire accuracy remains viable within 7 meters.
32-Round R.I.P Drum improves hip fire stability, allowing 50+ sensitivity while maintaining effective suppressive fire.
Hip fire receives 60% aim assist effectiveness vs ADS. Position crosshairs at chest height when navigating tight spaces to minimize adjustment distance.
Gyroscope Integration
Set gyroscope sensitivity to 150-200 for Bizon, allowing subtle device tilts to compensate for horizontal recoil drift. Enable only for ADS to prevent unintended disruption during hip fire.
Gyroscope works independently from aim assist—handles horizontal micro-adjustments while aim assist manages vertical tracking. This dual-input system produces smoother overall tracking.
S868 Shotgun Settings
S868 requires different philosophy—precise initial placement vs sustained tracking. Dual Trigger BAS fires two pellets simultaneously, doubling burst damage.
Aim Assist Strength
Reduce to 60-70, significantly lower than Bizon. Shotgun engagements occur within 5-8 meters where excessive assist creates crosshair drag interfering with flick shots.
Dual Trigger benefits from lower range (60-65). Two-pellet burst creates tighter spread rewarding precision. Testing reveals 63 as optimal—provides subtle magnetic pull without sticky feeling disrupting rapid target switching.
Flick Shot Sensitivity
Set base to 60-70, enabling 90-degree turns within 0.3 seconds. Critical when enemies approach from unexpected angles.
ADS should use 0.80-0.90 multiplier (higher than Bizon). With 65 base, set ADS to 52-59. Higher ratio maintains turning speed during ADS for engaging multiple targets rapidly.
Hip fire can match or exceed base (1.0-1.1 multiplier) since S868's effective range falls within viable hip fire distances.
Managing Pellet Spread
S868 fires 8 pellets/shot (16 with Dual Trigger) in circular pattern with 15-degree max spread. Aim assist centers pattern but can't artificially tighten spread.
FOV 90 provides optimal acquisition for shotgun ranges. Smoothness 5 maintains SMG consistency, though shotgun users may prefer 3-4 for faster acquisition.
ADS vs Hip Fire Priority
S868 performs nearly identically in both modes within effective range. ADS provides slight range extension (8m vs 6m one-shot kills) but reduces mobility 25%.
Hip fire suits aggressive playstyles emphasizing movement. Maintained mobility allows strafe-shooting while maintaining full accuracy.
ADS benefits defensive players holding angles. Slight range advantage justifies mobility penalty when positioning allows stationary engagements.
Advanced Comparison: Bizon vs S868
Bizon prioritizes sustained tracking over 1-3 second engagements at 10-20 meters. 32-round capacity and 750 RPM demand settings maintaining crosshair stability during extended automatic fire.
S868 demands instant acquisition and precise placement for 0.5-1 second engagements at 5-8 meters. Pump-action and two-shot capacity require settings prioritizing reaction speed.
Why Different Approaches
SMG aim assist compensates for recoil accumulation during sustained fire. Bizon's vertical climb and horizontal drift require continuous micro-adjustments.
Shotgun aim assist addresses acquisition challenges in chaotic close-range scenarios. S868's one-shot-kill potential means tracking duration matters less than initial placement accuracy.
Fundamental difference: engagement duration and shot count. Bizon requires 8-12 shots (1.5-2 seconds sustained tracking). S868 requires 1-2 shots (0.3-0.5 seconds precise placement).
Sensitivity Ratios for Weapon Switching
Players using both face compromise challenges. Solution: base sensitivity matching S868 requirements (60-70) with weapon-specific ADS multipliers—0.65-0.75 for Bizon, 0.80-0.90 for S868.
When switching S868 to Bizon mid-match, lower ADS multiplier automatically reduces effective sensitivity to tracking-appropriate levels.
Advanced: implement weapon-specific profiles through config.ini modifications. Create separate blocks for SMG/Shotgun classes, allowing automatic switching. Requires bloodstrike_aim.exe as administrator with -mode stealth.
Loadout-Specific Strategies
Primary Bizon: strength 77, Smoothness 5, ADS multiplier 0.70. Optimizes 10-20 meter versatility.
Primary S868: strength 63, Smoothness 4, ADS multiplier 0.85. Maximizes close-range dominance for building control.
Hybrid loadouts: Prioritize primary weapon's requirements. Set base sensitivity and aim assist for primary, accepting suboptimal secondary performance.
Real Gameplay Performance
Testing across 100+ matches reveals measurable improvements vs pre-update/default configs.
Bizon accuracy improved from 34% to 47% at 15 meters—38% increase translating to 2.5 fewer shots per kill, reducing time-to-kill from 1.8s to 1.3s.
S868 one-shot-kill consistency increased from 58% to 76% within 6 meters—31% improvement from reduced aim assist interference during flick shots.
Accuracy Metrics
Bizon headshot rate increased from 12% to 19% despite Chest targeting. Vertical recoil naturally climbs chest-to-head during sustained fire—proper aim assist maintains initial chest placement, allowing recoil to carry shots into headshot territory.
Mid-range (15-20m) showed most dramatic improvement. Hit rate at 18m increased from 28% to 41%. FOV 90 maintains acquisition at extended ranges where narrower FOV loses tracking.
S868 effective range extended from 6.2m to 7.8m average one-shot-kill distance. Lower strength (63 vs default 75) allowed more precise pre-fire aiming, resulting in tighter pellet grouping.
Kill-Time Reduction
Bizon at 10m: 1.5s to 1.1s (27% improvement). Smoothness 5 maintains tracking during target strafing, reducing missed shots.
Bizon at 15m: 1.8s to 1.3s (28% reduction). Improved sustained accuracy throughout 32-round magazine.
S868 within 6m: 0.8s to 0.5s average. Reflects increased first-shot kill rate (76% vs 58%), eliminating 0.6s chamber cycling delays.
Before/After Comparison
Pre-update, similar SMGs using old universal assist (FOV 85, generic smoothness) vs Bizon using new SMG-specific settings shows 23% average accuracy improvement and 19% kill-time reduction.
S868 existed pre-update but used rifle-oriented parameters. Switching from Rifle FOV 60/Smoothness 7 to SMG-aligned FOV 90/Smoothness 5 improved acquisition speed by 0.15s average.
Overall combat effectiveness (combining accuracy, kill-time, survival rate) improved 31% for Bizon users, 27% for S868 users when comparing optimized post-update to defaults.
Common Mistakes
Most prevalent: maximizing all parameters assuming higher values universally improve performance. Over-assisted aiming hinders rather than helps, particularly for S868 requiring manual precision.
Players copy pro streamer settings without accounting for device differences, input methods, playstyle variations. PC mouse/240Hz configs perform poorly on mobile touchscreen/60Hz.
Neglecting interaction between aim assist and recoil compensation creates conflicting inputs. Using RecoilComp 0.8 (rifle value) with Bizon causes over-correction fighting weapon's natural pattern.
Maximum Aim Assist Misconception
Strength 100 creates excessive magnetic pull preventing manual micro-adjustments. Bizon becomes locked onto initial zones, making headshot adjustments impossible and preventing target switching. Optimal: 75-80, not maximum.
Maximum Smoothness (10) produces sluggish tracking lagging behind target movement. Sniper Smoothness 10 suits bolt-action single-shots but fails catastrophically with Bizon's automatic fire.
Over-Reliance vs Manual Skill
Aim assist functions as training wheels, not replacement for mechanical skill. Players never practicing without assist develop dependency collapsing in PC Ranked's zero-assist environment.
Bizon's 32-round capacity encourages spray-and-pray that aim assist enables but doesn't optimize. Skilled players use assist for initial acquisition then rely on manual tracking.
S868 users depending entirely on assist never develop flick shot muscle memory defining expert shotgun play. One-shot-kill potential rewards precision exceeding aim assist capabilities.
Settings Conflicting with Weapon Characteristics
Using Sniper parameters (FOV 30, Smoothness 10, Target Head) with Bizon creates catastrophic degradation. Narrow FOV fails to acquire targets within SMG ranges; excessive smoothness prevents tracking during automatic fire. Reduces effectiveness ~60% vs proper SMG settings.
Applying Bizon settings to S868 produces moderate loss. Higher strength (77 vs 63) creates unwanted crosshair drag during flick shots, reducing one-shot-kill consistency 15-20%.
Recoil compensation conflicts: Rifle RecoilComp 0.8 with SMGs or vice versa. Bizon requires 0.7—using 0.8 over-corrects vertical climb, pulling crosshairs below target after 15-20 rounds.
Training Mode Exercises
Training Mode provides controlled environments for testing configs without competitive pressure. Bot Arena offers stationary, walking, strafing targets at various distances.
Spend 10-15 minutes per session testing Bizon tracking against strafing bots at 15 meters. Custom matches against friends enable realistic movement patterns bots can't replicate.
Bizon Tracking Drills
Set strafing bots at 15m, practice maintaining crosshair on upper chest/lower head during full magazine dumps. Bizon's recoil naturally climbs chest-to-head—proper tracking maintains this within head hitbox.
Practice target switching: position multiple bots 2-3m apart at 12m distance. Engage first for 8-10 rounds, switch to second and continue. Tests whether Smoothness 5 allows rapid switching or creates excessive stickiness.
Moving tracking drills: strafe perpendicular to bot movement while maintaining fire. Combines movement mechanics with aim assist tracking, revealing whether sensitivity ratios balance mobility and precision.
S868 Flick Shot Practice
Position three stationary bots in 90-degree arc at 6m. Practice rapid flick shots between targets without ADS, relying on hip fire accuracy and muscle memory.
Add movement by strafing laterally while executing flick shots. S868's mobility advantage during hip fire enables aggressive positioning—practice moving unpredictably while maintaining accuracy.
Practice ADS flick shots at 7-8m, S868's max one-shot-kill range. Tests whether ADS multiplier (0.80-0.90) maintains adequate turning speed during scoped aiming.
Sensitivity Fine-Tuning
Implement 5% incremental adjustments vs dramatic changes. If 35 ADS feels slightly slow, test 37 (5.7% increase) rather than jumping to 40.
Track performance metrics across 10-match samples for each config. Record accuracy %, average kill-time, subjective comfort ratings. Statistical analysis reveals genuine improvements vs placebo/random variance.
Test across different maps and modes. Configs excelling on close-quarters maps may underperform on open maps with longer sight lines.
Troubleshooting
Settings failing to save indicates file permission issues. config.ini requires write permissions—run bloodstrike_aim.exe as administrator: bloodstrike_aim.exe -game bloodstrike.exe -mode stealth
Inconsistent aim often stems from conflicting input sources. Disable gyroscope when testing pure aim assist to isolate variables.
Frame rate impacts responsiveness. System introduces <3% frame rate reduction when properly configured. Monitor using in-game display—consistent 60+ FPS ensures intended responsiveness.
Settings Not Saving
Verify config.ini location in Blood Strike installation directory. Default: C:\Program Files\Blood Strike\Config\config.ini. Some edit files in temporary directories that reset on launch.
Check file attributes—config.ini shouldn't be Read Only. Right-click, select Properties, uncheck Read Only if enabled.
Use Notepad++ vs Windows Notepad. Notepad sometimes introduces formatting errors corrupting config files.
Inconsistent Aim Behavior
Press Insert to toggle aim assist overlay, confirming system is active. Overlay displays current FOV radius and detected targets. If overlay doesn't appear, system isn't running.
Test in Training Mode with single stationary bot. Aim near (not directly at) bot and observe crosshair. Proper assist creates subtle magnetic pull. Absence indicates disabled/malfunctioning assist.
Verify weapon-specific settings by checking overlay FOV radius when switching between Bizon/S868. FOV circle should remain consistent (both use FOV 90) but strength differs.
Device Performance Impact
Lower-end devices (<4GB RAM) may experience input lag affecting aim assist timing. System calculates target prediction based on frame timing—inconsistent frame rates disrupt calculations.
Reduce graphics to maintain stable 60 FPS minimum. Disable shadows, reduce texture quality, lower resolution if necessary. Consistent frame timing matters more than visual fidelity.
Close background applications consuming CPU resources. Aim assist calculations occur on CPU, not GPU—background processes introduce delays manifesting as sluggish tracking.
Pro Tips
Combining aim assist with advanced movement multiplies effectiveness. Strafe-shooting with Bizon maintains tracking while making you harder to hit—Smoothness 5 compensates for lateral movement without manual crosshair adjustment.
Pre-aiming common angles reduces aim assist workload. Position crosshairs at head height where enemies appear, allowing assist to handle minor adjustments vs large-scale acquisition.
Sound cues enable predictive positioning maximizing aim assist effectiveness. Footsteps indicate approach direction—pre-aim these angles so assist activates immediately when enemies enter FOV radius. Transforms reaction time from 0.4s to 0.15s.
Movement Techniques
Strafe-shooting exploits tracking while maintaining evasive movement. Move perpendicular to target while firing Bizon—assist maintains crosshair while lateral movement disrupts enemy aim. Works best at 12-18m where movement creates significant angular displacement.
Jump-shotting with S868 combines vertical mobility with acquisition. Jump around corners with crosshair pre-aimed—assist activates mid-air, allowing accurate shots during jump apex. Requires high sensitivity (65+ base) for aerial control.
Slide-canceling maintains momentum while resetting acquisition. Slide toward cover, cancel, immediately ADS—triggers fresh detection acquiring targets faster than sustained ADS tracking.
Map-Specific Adjustments
Close-quarters maps (Cargo, Warehouse): Favor S868 configs even for Bizon. Increase base to 65+, reduce strength to 70 for faster target switching. Tighter ranges make tracking less critical than acquisition speed.
Open maps (Desert, Harbor): Tracking-focused Bizon configs. Reduce base to 55-60, increase strength to 80 for stable long-range tracking. Extended sight lines make sustained accuracy more valuable.
Mixed maps: Use baseline values (base 60, strength 77), rely on tactical positioning to force engagements at optimal ranges vs adjusting settings per map.
Seasonal Meta & Future-Proofing
Blight Horizon Strike Pass (launches December 15, 2025) introduces free-track 32-Round Dumdum Drum for Bizon. This alternative to R.I.P Drum may alter recoil patterns, potentially requiring RecoilComp adjustments from 0.7 to 0.65-0.75 range.
Future balancing patches may modify base recoil or fire rates. Monitor patch notes for changes to Bizon's 750 RPM or S868's pellet count—modifications necessitate recalibration.
Cross-reference settings against pro player configs published after major tournaments. Competitive meta reveals optimal configurations before mainstream knowledge.
FAQ
What are exact aim assist values for Bizon after December 4, 2025 update?
FOV 90, Smoothness 5, Target Chest, RecoilComp 0.7. Set strength 75-80, ADS sensitivity 0.65-0.75 multiplier of base, enable RecoilEnabled True in config files.
Does S868 use different settings than Bizon?
Yes—reduce strength to 60-70 vs Bizon's 75-80. Same FOV 90/Smoothness 5, but increase ADS multiplier to 0.80-0.90 for faster flick shots. S868 prioritizes acquisition speed over sustained tracking.
Can I use same settings for both weapons in loadout?
Compromise settings work but underperform weapon-specific configs. Use base matching primary weapon (60-70 for S868, 55-65 for Bizon) with weapon-appropriate ADS multipliers. Advanced: create separate profiles through config.ini.
How do I enable aim assist on PC after December update?
Run bloodstrike_aim.exe as administrator: bloodstrike_aim.exe -game bloodstrike.exe -mode stealth. Edit config.ini with Notepad++ to set FOV, Smoothness, RecoilComp values. Press Insert to toggle overlay and verify. Note: PC Ranked enforces zero aim assist.
Why does Bizon accuracy decrease after 15-20 shots despite aim assist?
Likely incorrect RecoilComp values. Bizon requires 0.7—using Rifle's 0.8 causes over-correction pulling crosshairs below targets. Verify RecoilEnabled True and RecoilComp 0.7 in config.ini, test in Training Mode.
What sensitivity for S868 one-shot consistency?
Base 60-70 with ADS multiplier 0.80-0.90 for optimal flick shots. Reduce strength to 63 to minimize crosshair drag during pre-fire aiming. Practice flick shots in Training Mode at 6-7m to develop muscle memory.
Ready to dominate Blood Strike with optimized settings? Top up your Battle Pass and unlock premium weapon skins at BitTopup – the fastest, most secure way to enhance your Blood Strike experience with instant delivery and exclusive deals!
